Zone 5

Temperature Control Unit - the heart of the solution

Temperature Control System – Water Based

Our Water Based Temperature Control Systems are simple, balanced and efficient. These self contained, closed loop systems require neither additional plumbing nor an external water source.

The Heat-Cool systems contain a water reservoir that circulates through the chiller. The process water circulates through the immersion heater.

When heating is required, the immersion heater turns on. When chilling is required, a solenoid valve opens and exchanges water from the process with water from the chiller loop.

The design of the temperature control system ensures that it is either heating or cooling but never both at the same time. The small increments required for heating or cooling and the use of water as the temperature control medium assure that the units use very little energy and are inexpensive to operate.

Temperature Control System – Thermoelectric

When reviewing applications, we look for opportunities to use our knowledge of Thermoelectric Temperature Control Systems.

For systems that do not see significant swings in ambient temperature but benefit from accurate temperature control, our Thermoelectric Systems offer an efficient and affordable option.

Our systems, based on the thermoelectric effect, (also known as the Peltier effect), are simple to operate and Saint Clair Systems has the expertise to apply them correctly.

In simple terms, the device contains a Peltier chip. When an electric current runs through the chip, one side gets hot and the other side gets cold. Reversing the current also reverses the temperature performance. By controlling the current, we can keep very tight control on the process material.

Temperature Control System – Variety

For over twenty years, Saint Clair Systems has created solutions for many types of applications and in many different industries. What follows is just a sample of our solutions.

AT-5900

Compact, efficient and economical, this unit is used in a variety of applications.

Available in either a Single or Dual version, the AT-5900 has enough heating and cooling capacity for many medium flow applications.

This unit will interface easily with host controller systems and requires very little setup. This is an easy improvement to many dispensing systems.  

Multi Station Recirculation Systems

When dispensing applications contain a large variety of options, (as in a multi-color paint system), our solutions can provide temperature control for each circuit. The unit pictured to the right is capable of controlling up to nine unique circuits.

Any combination of heating and cooling is available on one skid.

Discrete control or PLC interface options are available.

For use with remote-mounted heat exchanger systems, these units are compatible with all Saint Clair Systems heat exchangers, peripherals and chillers.

Anti-Condensation System

Small and inexpensive, this wall-mount heat only unit stops condensation on paint bells and icing of pneumatic pumps. Different from a traditional air heater, our units recirculate heated water to a heat exchanger mounted close to the source of the icing or condensation.

Traditional air heaters use air to transfer heat from outside of the booth to the bell. As air is a poor medium for heat transfer, these traditional air heaters are largely ineffective.

Our systems use water as the heat transfer medium. This gives us the means to get warm air at the point it is needed. Any paint operation using traditional air heaters are a great opportunity for a Saint Clair Systems Paint Bell Heater.

Chiller Based Multi-Circuit Temperature Control Units

Free Standing Modules

Independent and Complete Temperature Control

Continuous Automatic Heat/Cool transitions

Designed for multiple mid-size processes

Integrates with all SCS Peripherals

Ready to Install

simplified system	point of dispense	maintaining temp	moving temp	mix room